Special search types: R-group query structures

R-group query structures
Atom lists proved to be useful tools for creating query structures with variable atoms. JChem provides a similar variability feature of functional groups or other substructures in queries for molecule or reaction targets (tables) through the use of R-groups.

If you are interested in searching combinatorial Markush library targets (tables) described by R-group notation, see this following section.

Description of the use of undefined R-atoms in query structures can be found in this section.

Root structure

An R-group query structure consists of three components, a root structure (often referred to as scaffold), a set of R-group definitions, and R-group conditions. The root structure contains the portion of the query structure that does not vary among the structures retrieved. R-groups are attached as substituents to the root and their sites are marked with R1, R2, R3, etc. symbols. It is possible to attach multiple R-groups to one root, even to a single atom of the structure. One R-group can be attached multiple times to the same root, but it does not mean that all these attachments should be filled by the same definition (see occurrence conditions below for further information). An R-group without definitions is called undefined.

images/download/attachments/41128779/image127.png

images/download/attachments/41128779/image125.png

images/download/attachments/41128779/image126.png

R-group definitions

R-group definitions are variable lists of ligands connected to specific positions of the root structure by their attachment points.

images/download/attachments/41128779/image069.jpg

images/download/attachments/41128779/image070.jpg

images/download/attachments/41128779/image128.png

R-group query structure

The following figure displays an R-group query structure (root structure + R-group definitions) without R-group conditions.

images/download/attachments/41128779/image137.png

Conditions (R-logic)

R-logic conditions can be set by using by Marvin JS or by Marvin Sketch. As for Marvin JS, see the description of the necessary steps to be executed here.

As for Marvin Sketch, the necessary steps are described here below.

Conditions of R-group search can be set on the R-logic window of Marvin Sketch (available from menu: Structure > Attribute > R-logic...).

images/download/attachments/41128779/R-logic.png

When in Marvin Sketch, the View > Misc > R-logic is switched on, R-logic settings are displayed, too. By default, when R-groups are defined in the structure, and Structure > Attributes > R-logic has its default settings, R1 *, R2 *, etc. are displayed.

images/download/attachments/41128779/R-definition.png

Modification of the R-logic settings to

images/download/attachments/41128779/R-logic2.png

results the following display.

images/download/attachments/41128779/R-definition2.png

  • Occurrence

The occurrence condition defines the number of R-group sites to be occupied. For example, occurrence designation >0 for R1 specifies that the target molecule must contain at least one of the R1 substituents listed in the R1 group definition on its corresponding atom. If this condition is not specified (the default case), all occurrences are considered as mandatory ligands. (However, different occurrences of the same R-group can be substituted with different definitions.)

Examples of valid R-group occurrence specifications:

    • 3 : Exactly 3

    • >3 : More than 3

    • <3 : Less than 3

    • 2-5 : 2 to 5

The occurrence can also be specified as a comma separated list, in which there is OR relation between the elements. Example: "0,2-5,>6" means the specified R-group may occur zero, two to five, or more than six times (i.e., any occurrence but 1 and 6 is accepted).

Note: If the smallest number of the specified possible occurrences of an R-group is equal to the number of corresponding R-atoms actually drawn in the structure, then it is treated the same way as the unspecified condition: all substitutions are mandatory.

  • If/Then

If conditions for an R-group have to be satisfied only when conditions of another R-group are satisfied, use the If/Then conditions. For example, If R1 then R2 means that if the conditions for R1 are satisfied, then the conditions for R2 must also be satisfied. If the conditions for R1 are not satisfied, the conditions for R2 are ignored. This If/Then condition implies that the molecule may be retrieved even though R1 is not satisfied.

  • RestH

If the RestH condition is set for an R-group, the hit molecules do not contain ligands on that atom other than hydrogen or those specified as R-group. If RestH condition is false, then R-group sites can contain any additional non-hydrogen ligands as well.

Table 1. R-group query structures

 

target

images/download/attachments/41128779/image071.png

query

images/download/attachments/41128779/image072.png

default R1 * R2 *

images/download/attachments/41128779/no.png

R1 >0 R2 >0

images/download/attachments/41128779/yes.png

R1 >1 R2 *

images/download/attachments/41128779/no.png

R1 * R2 >0

images/download/attachments/41128779/yes.png

R1 *, RestH R2 1

images/download/attachments/41128779/no.png

images/download/attachments/41128779/image073.png

default

images/download/attachments/41128779/no.png

if R1 then R3

images/download/attachments/41128779/no.png

if R2 then R3

images/download/attachments/41128779/yes.png

Nested R-groups

R-group definitions may also contain other R-groups, that is, R-groups may be nested (to any depth). See an example below:

images/download/attachments/41128779/image129.png

In nested R-groups, the occurrence conditions are interpreted the same way as in the root, but separately and locally for each definition of each R-group. See examples below:

Query

Hits

Non-hits

images/download/attachments/41128779/image130.png

images/download/attachments/41128779/image131.png

images/download/attachments/41128779/image132.png

images/download/attachments/41128779/image133.png

images/download/attachments/41128779/image134.png

images/download/attachments/41128779/image135.png

images/download/attachments/41128779/image136.png

images/download/attachments/41128779/image118.png

images/download/attachments/41128779/image119.png

images/download/attachments/41128779/image120.png

images/download/attachments/41128779/image121.png

images/download/attachments/41128779/image122.png

images/download/attachments/41128779/image123.png

images/download/attachments/41128779/image124.png

Remarks

The following restrictions apply to R-group queries.

  • R-logic conditions allowing optional occurrence are not supported for R-groups with multiple connections (attachment points).

  • R-groups can have more than two connections (attachment points) only if

    • the query does not have R-logic conditions;

    • the number of enumerates does not exceed 100.

  • RestH condition is not supported for nested R-atoms connected to an attachment point in the definition of another R-group.

  • Undefined R-atoms are not supported if the query has a defined R-group with R-logic conditions.

  • Undefined R-atoms cannot be directly connected to other R-atoms.

  • Undefined R-atoms cannot be in nested position.

  • See further restrictions affecting the use undefined R-atoms.

  • Query properties are not supported on R-atoms.

  • rb* (ring bonds as drawn) query property is not supported on the atoms of R-group definitions. However, you can use an explicit number with the rb query property (e.g., rb2).

    R-group decomposition

    For a description of R-group decomposition, see this separate document.